Solidworks Abaqus Associative Interface | iMechanica
imechanica.org
Solidworks Abaqus Associative Interface | iMechanica

Jam3s

Mon, 21 Sep 2009 17:13:29 GM

I've a problem with the trasfer of a part from Solidworks to . Abaqus. and I hope that somebody can help me. Solidworks . Abaqus. Associative Interface gives me the possibility to trasfer part manteining features like partitions or mesh and ...

Methods to model forced convection with Abaqus
imechanica.org
Methods to model forced convection with Abaqus

A. Borbone

ue, 29 Sep 2009 15:22:03 GM

Hi,. I was wondering if someone of you knows a way to model forced convection by fluid movement in . Abaqus. without using DCC*** elements,. because they are linear, they don't have displacament DOF. I know DCC... forced convection ...

Modeling HyperElastic Material in ABAQUS , | iMechanica
imechanica.org
Modeling HyperElastic Material in ABAQUS , | iMechanica

mcmistry

ue, 08 Sep 2009 21:43:29 GM

ABAQUS. /CAE. Dear All,. I am modeling rubber seal with hyperelastic material and I am using CAX4R Element for modeling. I achieved contact solution using initial analysis and as an output I got contact pressure and radial and axial ...

 abaqus | iMechanica
imechanica.org
abaqus | iMechanica

kisku

hu, 27 Aug 2009 05:43:55 GM

dear all,. i wanted some help regarding the dynamic modelling of IMPACT on plates by BLUNT and hemispherical nosed prjectiles with procedures and simulations using . ABAQUS. . thanking you all. -sanjay. How to apply moving load on simply ...

How to evaluate crack growth in ABAQUS | iMechanica
imechanica.org
How to evaluate crack growth in ABAQUS | iMechanica

SIVAKUMAR MVN

ue, 25 Aug 2009 14:00:14 GM

I am using . ABAQUS. /STANDARD and . ABAQUS. /EXPLICIT for solving the above problem. I want to plot a curve between CTOD and Crack growth ( a) of a surface crack. I am able to evaluate the CTOD from 45 degrees intecept concept. ...

 ABAQUS advanced course!
cybernetics.ro
ABAQUS advanced course!

Alin

Mon, 17 Aug 2009 12:21:33 GM

ABAQUS. advanced course! ab1.JPG. cybernetics, together with Dassault Systems Simulia, organises during period 28 September - 1 October an advanced training courses for . ABAQUS. solution. The topics covered include: ...

 ABAQUS running in a PC with a dual core processor | iMechanica
imechanica.org
ABAQUS running in a PC with a dual core processor | iMechanica

Thanasis Zisis

Wed, 15 Jul 2009 10:18:57 GM

The second thing that I would like to ask: What is the command that should be added in the command line in order to run . abaqus. with increased memory, say from 500Mb, to 1000Mb. Thanks in advance. . ABAQUS. - Problem concerning "concrete ...

Delphi Automotive Systems Private Limited : Requires Mechanical ...
centpercent.com
Delphi Automotive Systems Private Limited : Requires Mechanical ...

neelam

Fri, 09 Oct 2009 09:17:17 GM

Work in a group but handle independent project with life cycle of 2 or 3 weeks approximately.

Engineering files/tutorial : Patran, finite element, FE, abaqus
filesforbrain.com
Engineering files/tutorial : Patran, finite element, FE, abaqus

tdomf_78aac

Sun, 11 Oct 2009 15:29:31 GM

pdf, .ppt, .doc) This tutorial aims to lead beginners into the world of Patran by creating an FE model from scratch. Simple as it is, the tutorial covers almost all essential steps to build FE models for tubular joints and provides ...

Reading contour integrals from Abaqus output database | iMechanica
imechanica.org
Reading contour integrals from Abaqus output database | iMechanica

Archie

ue, 21 Jul 2009 11:05:13 GM

I am trying to read J integrals and K Factors from an . Abaqus. history output database, but I'm however getting a KeyError for 'setname=_Picke​dSet24' which is the nodeset generated from . abaqus. cae for the cracktip node. ...

 Abaqus 6.9 | iMechanica
imechanica.org
Abaqus 6.9 | iMechanica

Builttolast

Sun, 21 Jun 2009 15:54:12 GM

"Error in job tensile: Problem during linking - . Abaqus. /Standard User Subroutines. This error may be due to a mismatch in the . Abaqus. user subroutine arguments. These arguments sometimes change from release to release, so user subroutines ...

Contact in ABAQUS
imechanica.org
Contact in ABAQUS

Peyman Khosravi

Sun, 20 Sep 2009 04:08:22 GM

I am not sure but I think there was an option called self contact or ... which was applicable whenever the surface contacted itself any where, which could be helpful in this case. Or may be that is the same as General contact that you ...

some comments on abaqus /simulia
imechanica.org
some comments on abaqus /simulia

Carlos A. Carlassare

Mon, 14 Sep 2009 15:59:33 GM

1) . abaqus. was conceived as a non-linear solver that handles linear models as a particular case. this feature makes it extremely powerful, robust and easy to use moving from one field to the other onejust one click away of geometrical ...

Simulia Abaqus v6.8.1
softleecher.com
Simulia Abaqus v6.8.1

admin

Fri, 09 Oct 2009 07:09:46 GM

Complete solution for . Abaqus. finite element modeling, visualization, and process automation With . Abaqus. /CAE you can quickly and efficiently create, edit, monitor, diagnose, and visualize advanced . Abaqus. analyses. ...

How to rectify an Element error in Abaqus ? | iMechanica
imechanica.org
How to rectify an Element error in Abaqus ? | iMechanica

anilathampy

Wed, 17 Jun 2009 13:31:02 GM

The parts should show up with a color when they have sections assigned to them. I'm positive you have missed something during this step since i've seen this issue arise almost every time i teach someone how to use . Abaqus. /CAE ...

 abaqus in industry and civil engineering
imechanica.org
abaqus in industry and civil engineering

Twebb83

hu, 10 Sep 2009 18:34:05 GM

abaqus. is heavily used in all commerical industries, including aero, auto, medical devices, and civil engineering. while i might come across as biased as i work for simulia, the devlopers of . abaqus. , i am going to point you to some case ...

User subroutines in ABAQUS | iMechanica
imechanica.org
User subroutines in ABAQUS | iMechanica

Nicholas Epiphaniou

hu, 11 Jun 2009 14:10:09 GM

Could you suggest any literature or online step by step tutorial on how to create your own subroutines in . ABAQUS. like umeshmotion or umat. Any relevant information would be much appreciated. I am looking for information that are not ...

Question in sequentially coupled thermal stress analysis using ...
imechanica.org
Question in sequentially coupled thermal stress analysis using ...

ganesh.anandakumar

hu, 13 Aug 2009 00:16:49 GM

I was wondering if anyone has solved a sequentially coupled thermal stress analysis problem using . ABAQUS. ? If so, here is what I am looking to solve. Let's assume we solved for the temperature (T) as a function of time and space using ...

how can i model a Composite of 3 layup? ABAQUS | iMechanica
imechanica.org
how can i model a Composite of 3 layup? ABAQUS | iMechanica

booklee

hu, 06 Aug 2009 14:43:33 GM

hi``eveybody. I am new to . ABAQUS. ,have a model to simulation. it has 3 plies that are combined with glue. the core ist polymer and the upper,lower ply is the same steel. the 3 plies have eigenvalue of thichness ...

 abaqus
imechanica.org
abaqus

kisku

Wed, 26 Aug 2009 17:00:14 GM

hello everybody,. i'm very much new new to . abaqus. 6.7-4, which i'm using it in my project work. i just wanted some help regarding the procedures or any kind of tutorial that will help me learnig the software. thank you.

From Google Blog Search: 'abaqus'
Mon Oct 12 08:56:26 2009 [ refresh local cache ]

What program can be used to open a .sta file?
Q. I've searched Google and only come up with ABAQUS software suite; however, I know this is Not the correct program. The files are job proposals containing a letterhead and text and were generated with something like a word processor or desktop publishing program.
Asked by Peter S - Wed Mar 12 14:45:31 2008 - - 3 Answers - 0 Comments

A. my vote goes for it being a 'stationery'/template file exported from the 'eudora' email program: the eudora software can be downloaded from:
Answered by piquet - Wed Mar 12 14:58:08 2008

Yahoo Answers Search: abaqus,
Sat Oct 24 03:32:16 2009